Distributed Energy Systems NorthWind 100 - 100kW Wind Turbine
The NW100 occupies a vital place in the micro wind market. With many manufacturers
now withdrawing from this size of turbine or imposing minimum and prohibitive order
quantities (such as 10-15), the NW100 is available in single units and within short
time frames.
Supplied on a 25m monopole tower (or taller) the NW100 is potentially suitable for
the built environment in which turbines on 18-20m hub heights are being typically
being recommended. The NW100 is also supported with noise data conducted to IEC
standards.
The manufacturers of the NW100, Northern Power Systems, have been designing and
engineering wind turbines and power electronics for variable speed direct drive
systems since the 1970s. They are a founding member of the American Wind Energy
Association (AWEA) and are regularly asked to comment on turbine performance, design
and engineering.
NW100 wind turbines are located throughout the world, including the South Pole,
the Sahara Desert and the National Renewable Energy Laboratory's National Wind Test
Site at Golden, Colorado. Their turbines in Antarctica have successfully operated
for almost 20 years in winds up to 88.5 m/s (198 mph) and temperatures as low as
-80º C (-112º F).
The technical specification is detailed below and this is also available to download
as a PDF file.
Download NorthWind 100 technical specification
For further information such as foundation and tower design, noise data, etc or
to discuss your requirements in more depth, please contact
us.
Download our wind turbine enquiry form
Technical specification
|
SYSTEM
|
|
Type
|
3Ph Grid Connected
|
|
Configuration
|
Horizontal Axis
|
|
Rotor Diameter
|
19 m, 20 m
|
|
Centerline Hub Height
|
25 m, 32 m, 37 m
|
|
Drive Train
|
Direct Drive
|
|
|
|
DESIGN SPECIFICATIONS
|
|
Turbine Class
|
IEC WTGS Class S
|
|
Design Life
|
30 year
|
|
Design Standards
|
In accordance with
IEC 61400-1
|
|
|
|
PERFORMANCE PARAMETERS
|
|
Rated Electrical Power
|
500 kW @15 m/s
|
|
Wind Speed Ratings:
|
|
|
cut-in
|
4 m/s
|
|
shut-down (high wind)
|
25 m/s
|
|
design speed
|
59.5 m/s
|
|
|
|
|
Calculated Annual Output @ 100 % availability
|
5.0 m/s 150,300 kWh
6.0 m/s 227,800kWh
7.0 m/s 305,400 kWh
|
|
|
|
ROTOR
|
|
Type of Hub
|
Fixed Pitch
|
|
Rotor Diameter
|
19 m, 20 m
|
|
Swept Area
|
284 m², 314 m²
|
|
Power Regulation
|
Variable Speed Stall
|
|
Number of Blades
|
3
|
|
Rotor Speed @ rated wind speed
|
57 rpm
|
|
Location Relative to Tower
|
Upwind
|
|
Cone Angle
|
0º
|
|
Speed Range
|
45 - 69 rpm
|
|
|
|
BLADES
|
|
Aerofoil
|
S819, S820, S821Series
|
|
Material
|
Fiberglass Reinforced Plastic (FRP)
|
|
Lightning Protection
|
Standard Integrated System
|
|
|
|
|
DRIVE TRAIN
|
|
Configuration
|
Variable Speed Direct Drive
|
|
Tilt Angle
|
4º
|
|
Generator Type
|
Salient Pole Synchronous
|
|
Insulation Class
|
NEMA H
|
|
Generating Speed
|
45 - 69 rpm
|
|
Generator Rating
|
100 kW w/ 1.15 Service Factor
|
|
Speed Control
|
Caliper Brake, Dynamic Brake
|
|
|
|
|
GRID CONNECTION
|
|
Grid Tolerance
|
+10/-15% voltage; +/- 2Hz
|
|
Electrical Output
|
Ductile iron
|
|
Power Factor Compensation
|
>0.99 PF at rated
|
|
Inverter Output Reactive Power
|
+/- 45kVar@480V
|
|
|
|
|
BRAKING SYSTEMS
|
|
Mechanical Brake
|
Main Shaft Disc Brake w/ Dual Spring Applied Calipers
|
|
Electro-Dynamic Brake
|
Parking and emergency backup
|
|
|
|
|
YAW SYSTEM
|
|
Type
|
Active Upwind
|
|
Damping System
|
Adjustable Friction
|
|
Yaw Drive
|
Electrically Driven Planetary Gearbox
|
|
Yaw Bearing
|
Slew Ring
|
|
|
|
|
TOWER
|
|
Type
|
Tubular Steel
|
|
Hub Height
|
25 m, 32 m, 37 m
|
|
Corrosion Protection
|
Marine Grade Paint
|
|
|
|
|
FOUNDATION
|
|
Type
|
Concrete pads, piers or special
|
|
|
|
|
|
|
SERVICE ENVIRONMENT
|
|
Tower
|
Fully Enclosed, Ladder, Safety Climb
|
|
Nacalle
|
Fully Enclosed
|
|
|
|
|
CONTROLLER
|
|
Type
|
Northern WTGS-100 Controller, Microprocessor-based
|
|
Functions
|
Complete Supervisory Control and Data Acquisition
|
|
Remote Control/ Monitoring
|
Aerodynamic tip brake. Parking brake for servicing
|
|
Power Electronics
|
IGBT Pulse Width Modulation (PWM) Converter
|
|
|
|
ENVIRONMENTAL SPECIFICATIONS
|
|
Temp Operating Range
|
-46°C to 50°C (-50°F to 122°F)
|
|
Lightning Protection
|
In Accordance with IEC 61024‐1
|
|
Icing/Dust/Dirt Ice
|
Cover to 30mm
|
|
Seismic Loading
|
Zone 4
|
|
|
|
|
MASSES
|
|
|
Rotor
|
875 Kg
|
|
Nacelle (excluding rotor)
|
6587 Kg
|
|
Tower (25 m)
|
6500 Kg
|
|
|
|
|
|
|
|
|
|
